V1,1
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not
function properly or parts are missing. If unable to do so, have a
qualified technician service the tool.
PROBLEM(S)
Magnetic and motor
do not function
Magnetic functions;
motor does not
Magnetic does not
function; motor does
Hole cutters break
quickly; holes are
bigger than the cutter
Motor running roughly
and/or seizing up
Visit www.princessauto.com for more information
Magnetic Drilling and Tapping Press
POSSIBLE CAUSE(S)
•
The magnet switch is not connected to the
power supply
•
Damaged or defective wiring
•
Defective fuse
•
Defective magnet switch
•
Defective control unit
•
Defective power supply
•
Damaged or defective wiring
•
Carbon brushes are stuck or worn out
•
Defective magnet switch
•
Defective on/off switch
•
Defective control unit
•
Defective armature and/or field
•
Defective protective reed switch
•
Defective magnet
•
Defective fuse
•
Defective control unit
•
Play in the guide
•
Bent spindle
•
Shaft extending from the motor is bent
•
Pilot bent
•
Bent spindle
•
Shaft extending from the motor is bent
•
Triangular guide not mounted straight
9027525
19