Inputs #2 To 8 Description; Outputs Description - Analog way OCTO-FX2 Manuel Utilisateur

Chapter 2 : STARTING (continued)

2-4. INPUTS #2 to 8 DESCRIPTION

CONNECTION:
You can connect to these inputs one of the following source:
• A composite video source.
NOTE: The input #7 can accept a composite video source on its BNC connector. The input #8 can accept a
composite video source on its RCA connector.
• A S.VIDEO source.
NOTE: The input #7 can accept a S.VIDEO source on its BNC connectors. The input #8 can accept a S.VIDEO
source on its 4-pin mini DIN connector.
• A Component video source.
• A HD-YUV source.
• A RGBS video source.
• An analog computer source (RGBHV, RGsB, RGBS).
HD15 PIN ASSIGNMENT:
SIGNAL COMPUTER (analog)
PIN 1 RED.
PIN 2 GREEN.
PIN 3 BLUE.
PIN 6 RED return.
PIN 7 GREEN return.
PIN 8 BLUE return.
PIN 10 GND.
PIN 13 H sync or C sync (S).
PIN 14 V sync.
AUDIO SOURCE:
-You can connect an unbalanced stereo audio source on a jack 3.5 connector (input #2 & 8).
-You can connect an unbalanced stereo audio source on a MCO connector (input #3 to 6).
-You can connect an unbalanced or balanced stereo audio source on a MCO connector (input #7).

2-5. OUTPUTS DESCRIPTION

ANALOG OUTPUT:
You can connect to this output an analog display device.
DVI OUTPUT:
You can connect to this output an analog* or digital display device.
* OFX803, OFD803 & OCP803.
DVI-I PIN ASSIGNMENT (OFX803, OFD803, OCP803):
Pin Function
1 TMDS Data 2-
TMDS Data 2+
2
3 TMDS Data 2 Shield
4 Not used.
Not used.
5
DDC Clock
6
7 DDC Data
8 Analog Vertical Sync.
C1 Analog Red video (or Cr / Pr or C)
C2 Analog Green Video (or Y or composite video)
Analog Bleu Video (or Cb / Pb)
C3
C4 Analog Horizontal Sync (or composite sync)
C5 Analog Common Ground Return
DDC = Display Data Channel.
TMDS = Transition Minimized Differential Signal.
PAGE 16
VIDEO RGB/S
RED. Cr / Pr.
GREEN. Y.
BLUE. Cb / Pb.
RED return. Cr / Pr return.
GREEN return. Y return.
BLUE return. Cb / Pb return.
GND.
C sync (S).
Pin Function
9 TMDS Data 1-
TMDS Data 1+
10
11 TMDS Data 1 Shield
12 Not used.
Not used.
13
+ 5V (Power)
14
15 Ground for (+5V)
16 Hot plug detect.
YUV & HD-YUV S.VIDEO (Y/C)
C (chrominance).
Y (luminance).
C return.
Y return.
HD15 female connector of the device.
Pin
1
9
17
OCTO
COMPOSITE VIDEO
VIDEO (NTSC, PAL...)
return.
1
5
10
6
15
11
Function
17 TMDS Data 0-
TMDS Data 0+
18
19 TMDS Data 0 Shield
20 Not used.
Not used.
21
TMDS Clock Shield
22
23 TMDS Clock+
24 TMDS Clock-
8 C1 C2
16
24 C3 C4
²
/ QFX402
C5