VALBERG 14S40 B XAD929C Consignes D'utilisation page 17

B
Under an existing worktop (in case of installation under a worktop)
• In most modern fitted kitchens, there is a single worktop under which the cabinets
and appliances are installed. In this case, remove the worktop from the dishwasher by
removing the screws under the rear edge of the top section).
CAUTION
After removing the worktop, the screws must be reinstalled
under the rear edge of the upper section). The height of the
appliance will then be reduced to 815 mm, in accordance
with international (ISO) regulations, and the dishwasher will
fit perfectly under the kitchen worktop.
Using the appliance
15 EN