Publicité
Les langues disponibles
Les langues disponibles
B
Using your dishwasher
Before using your dishwasher:
1. Set the water softener.
2. Add salt to the water softener
3. Load the rack
4. Fill the container
PLEASE NOTE
You can refer to the «water softener» section if you need to
adjust the water softener.
Adding salt to the water softener:
If your model does not have a water softener, you can skip this section. Always use salt that
is intended for use in a dishwasher.
The salt container is located under the lower rack and should be filled as described below:
WARNING
• Only use salt specifically for use in dishwashers!
• Any other type of salt that is not specifically for use in a
dishwasher, especially table salt, will damage the water
softener. In the event of damage caused by the use of
unsuitable salt, the manufacturer will decline any warranty
claim and may not be held liable for the damage caused.
• Wait until you are ready to start a wash cycle before filling
the salt container.
• This will prevent any grains of salt or salt water that may
have been spilled and left at the bottom of the machine for
any length of time from causing corrosion.
Using the appliance
Interior
Exterior
7
EN
Publicité
