Napoleon Tall Linear Vector Serie Manuel D'installation page 68

maintenance
EN
13.4 valve removal
Shut off gas and disconnect electrical supply.
A.
Remove the safety screen, front trim, and glass door, refer to the "safety barrier installation / removal"
B.
and "firebox glass door installation / removal" sections for details.
Remove the finishing trim and front cover, refer to "control access" for details.
C.
Disconnect the flex connectors and pilot tube from the valve. Remove the valve wire connections, labeling
D.
each one to aid with re-connection.
Remove the screws from the valve bracket and remove the valve.
E.
Replace all components before returning the appliance to service.
F.
Check for gas leaks by brushing on a soap and water solution.
G.
13.5 control module removal
Shut off gas and disconnect electrical supply.
A.
Remove the safety screen, front trim, and glass
B.
door, refer to the "safety barrier installation /
removal" and "firebox glass door installation
/ removal" sections for details.
Remove the finishing trim and front cover, refer to
C.
"control access" for details.
Remove 2 screws holding the control module in
D.
place, unplug and remove.
Ensure to identify the wires plugged into the
E.
control module. It is critical that wires are
reconnected to the appropriate connectors.
Replace and reinstall components.
F.
68
W415-4127 / B-0 / 03.25.24
CONTROL
MODULE