Publicité
Les langues disponibles
Les langues disponibles
● Power Limitation
The Power Limitation function allows the product to be
used while limiting its maximum absorption, adjusting the
absorbed power in all active cooking zones, ensuring that
the total absorbed power of the hob does not exceed the
set maximum absorption level.
Note: the setting must be made with the hob switched off,
without pressing the
ON/OFF (1) button, when the hob
is connected to the mains, or reconnected to the mains,
within the next 2 minutes.
To set the Power Limitation:
• press
(which will flash, only for the first 2 minutes
after the product has been switched on)
• while continuing to hold down
time, all the Selection/Display areas (2) of the cooking
zones in a counter-clockwise direction starting from the
front left zone (FR); a short acoustic signal will be emitted
with each press and when all the Displays (2) have been
pressed, it will be possible to release the key:
at this point, the Display (2) of the rear left zone (RL) will
show, in alternating sequence, the symbols
indicating that the setting can be made.
• select the Display (RL-2) then slide along the Selection
bar (3), until the Display shows the symbols
The Display (FL-2) will show the current setting with the
values in the table:
Displayed value
Power (Kw)
7.4 Kw (default setting)
4.5 Kw
3.1 Kw
To change the Power Limitation setting:
• press the Display (FL-2) then slide along the Selection
bar (3), to
set the new setting. To save the selection made, press the
ON/OFF (1) button for 2 seconds; an extended audible
signal will be emitted to confirm the setting.
● Key Lock
The Key Lock allows you to lock the settings of the hob to
prevent accidental tampering with the same, while leaving
the set functions enabled.
Activation:
• press
Note: if any other function is pressed while the Key Lock is
active, the symbol
is in use and must be deactivated if necessary in order to
use the hob.
● Automatic Heat UP
The Automatic Heat UP function allows the set power to be
reached more quickly; with this function it is possible to
cook food faster without the risk of burning it, insofar as the
temperature does not exceed the set level. This function is
, press, one at a
available for power levels from
Activation:
• with the cooking zone on, press
will show a flashing
the cooking zone.
By increasing the power level of the cooking zone: the
Automatic Heat Up function remains active, with the new
temperature setting;
By decreasing the power level of the cooking zone: the
Automatic Heat Up function is deactivated.
Note: by selecting another cooking zone at the same time,
the symbol
light intensity, and it will be possible to proceed, also for
this zone, with the activation of the function; in any case,
the function remains active in the zone in which it has
and
,
already been set, as indicated in the Display (2).
● Pause
and
;
The Pause function allows active functions on the hob to be
suspended, bringing the cooking power to zero.
Activation:
• press
To deactivate the function:
• press
• press/slide on the Selection Bar (3) to deactivate the
function.
Note: deactivation restores the conditions of the hob before
the pause; the hob continues to work with the same
settings previously set.
Note: if after 10 minutes, the Pause Function is not
deactivated, the hob will turn off automatically.
Note: the Pause Function does not affect the extraction.
● "STAND ALONE" Timer
The Timer function is a countdown independent of the
cooking zones (and the extraction zone).
19
(10) Repeat the operation to deactivate.
will flash to indicate that the function
to
, alternating with the power set in
(7) will go back to being illuminated with
(9), the symbol
will flash on the display (2)
(9) the Selection bar (3) will light up
.
(7), the Display (2)
Publicité
