Publicité
Les langues disponibles
Les langues disponibles
COOKING ZONE DISPLAY
The following is shown on the cooking zone displays:
Function
Cooking zone on
Power Level
Residual Heat Indicator
Pot Detector
Temperature Manager Function active
Pause function
Automatic Heat UP function
CHARACTERISTICS OF THE HOB
● Safe Activation
The product is activated only in the presence of pots on the
cooking zone: the heating process does not start or is
interrupted if there are no pots, or if these are removed.
● Pot Detector
The product automatically detects the presence of pots on
the cooking zones.
● Safety Shut Down
For safety reasons, each cooking zone has a maximum
operating time, which depends on the power level set.
● Residual Heat Indicator
When switching off one or more cooking zones, the
residual heat is indicated with a specific visual signal on the
display of the corresponding zone by the symbol
USING THE HOB
Note: Before activating any functions, the desired zone
must be activated
● Power-on
Briefly press (touch)
the symbol
lights up; If you continue to press: all the
available functions will become visible for a few seconds,
after which only the main ones will remain active; the other
ones can be used, and will be activated, later, while using
the device.
all the available functions will be
IMPORTANT:
illuminated with light intensity, which will become
more intense only when they are activated.
Press again to turn off
Note: This function has priority over the others.
● Selecting the cooking zones
Briefly press (touch) the Selection/Display (2) area
corresponding to the desired cooking zone.
Value
.
ON/OFF (1) hob / extractor fan:
● Power Level
The hob features 9 power levels. Touch and slide your
fingers along the Selection bar (3):
to the right to increase the power level;
to the left to decrease the power level.
The power level set will be displayed in the Selection/
Display area (2)
● Power Booster
The product features a supplementary power level (after
level
), which remains active for 5 minutes, after which
the temperature returns to the previously set value.
Touch and slide your fingers along the Selection bar (3)
(beyond level
) and activate the Power Booster. The
Power Booster level is indicated in the Selection / Display
area (2) with the symbol
● Cooking Zone Timer
The Cooking Zone Timer function is a countdown that can
be set, even simultaneously, on each cooking zone. At the
end of the period set, the cooking zones switch off
automatically and the user is notified with a dedicated
acoustic signal.
Activation of the cooking zone timer function
• Touch (press) the Selection/Display area (2) (power
level other than zero)
• Press
(6) relating to the cooking zone
• Use the symbols
Timer, which is shown in the Zone/Display (4); while
setting, the symbol
Note: wait 10 seconds without pressing any other
command, so that the Cooking Zone Timer will start.
Note: by pressing and holding
zone Timer is reset.
If desired, repeat the operation for several cooking
zones:
Each cooking zone can have a different Timer set; in the
display (4) the countdown of the cooking zone selected at
that moment will appear; if no zone is selected, press the
Display (4) to view the STAND-ALONE Timer countdown.
When the timer has finished the countdown, an acoustic
signal sounds and the cooking zone switches off.
To switch off the Timer:
• select the cooking zone (2)
• set the duration of the Timer to
(5).
The countdown display mode is the same as for the
STAND-ALONE Timer.
18
(5) to set the duration of the
(6) flashes.
(6) again, the cooking
, using
Publicité
