THOMSON Crea Chef XL THFP9714G Mode D'emploi page 43

Troubleshooting
Problems
The machine does not
work.
Noise in the mixing bowl
when working (accessory
scraped the bowl)
The pot lid does not fit
properly in the mixing
bowl.
The machine does not
work at a certain speed.
Movements at the
machine work
The up button has not
replaced after the
installation of the mixing
bowl and pot lid.
For any other problems occurring on your device: contact customer service.
− Check whether the plug is in good
contact with the socket.
− Check whether the arm release button
is pressed.
Check whether the machine works
−
continuously for more than 6 minutes
and wait until the engine cools down.
− Check the mixing bowl is properly installed.
Check that the accessory is
−
correctly installed on the machine.
− Check the bowl lid is placed correctly
on the machine.
Check the mixing bowl is properly
−
installed on the machine and properly
locked.
− Check that the mark on the speed button
corresponds to the speed of screen
printing on the case.
Turn the speed button 0, and check again
−
if the machine works.
− Check the slip feet are not removed.
Check if the machine is placed on
−
a smooth and flat table.
− Check the bowl lid is placed correctly
on the machine.
Check the mixing bowl is properly installed.
−
EN-19
Solution