Publicité
Les langues disponibles
Les langues disponibles
SET-UP
BE-LS25Ex
KNOW CONTROLS & FEATURES
NOTE: This Operator's Manual covers several models. Log splitter features may vary by model. Not all features
in this manual are applicable to all log splitter models and the log splitter depicted may di er from yours.
Beam Lock
The horizontal beam lock, as its name suggests, is used to secure the beam in the horizontal position.
The horizontal beam lock is located on the beam support latch bracket.
Engine Controls
See the Engine Operator's Manual for the location and function of the controls on the engine.
Control Handle
The control handle has three positions; Forward, Neutral and Reverse. See the Operation section for instructions.
Splitting Wedge
The wedge is used to split the wood.
Log Dislodger
The log dislodgers are designed to remove any partially split wood from the wedge. This may occur while
splitting large diameter wood or freshly cut wood.
Log Tray
The log trays are designed to catch the log after it is split.
Tongue
The tongue is used to attach to a towing vehicle for transportation.
End Plate
The end plate holds the log in place while the wedge splits the log.
Publicité
