Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE SAFETY
1. Stop the engine, disconnect the spark plug and ground it against the engine before cleaning, or inspecting
the machine. NEVER perform any service or repair on your log splitter without first removing the spark
plug wire.
2. Stop the engine and relieve hydraulic system pressure by cycling the valve control lever from forward to
reverse several times while the engine is not running. Return it to neutral before repairing or adjusting
fittings, hoses, tubing, or other system components.
3. ALWAYS perform all recommended maintenance procedures before using your log splitter.
4. ALWAYS check the level of hydraulic oil and engine oil before operation.
5. ALWAYS periodically check that all nuts, bolts, screws, hydraulic fittings and hose clamps are tight to be
sure equipment is in safe working condition.
6. ALWAYS replace all damaged or worn parts immediately with original equipment manufacturer's O.E.M.
parts only. Use of parts which do not meet the original equipment specifications may lead to improper
performance and compromise safety.
7. The hydraulic system of your log splitter requires careful inspection along with the mechanical parts. Be
sure to replaced frayed, kinked, cracked or otherwise damaged hydraulic hoses or hydraulic components.
8. NEVER check for leaks of hydraulic fluid with your hand. Fluid escaping from a small hole can be almost
invisible. Escaping fluids under pressure can have su cient force to penetrate skin causing SERIOUS
INJURY or DEATH. Leaks can be safely detected by passing a piece of cardboard over the suspected area
and looking for discoloration.
9. NEVER remove the cap from the hydraulic tank reservoir while the log splitter is running. The tank could
contain hot oil under pressure which could result in serious injury.
10. NEVER adjust the hydraulic valve. The pressure relief valve on your log splitter is present at the factory.
Only a qualified service technician should perform this adjustment.
11. ALWAYS seek professional medical attention immediately if injured by escaping hydraulic fluid.
Serious infection or reaction can develop if proper medical treatment is not administered immediately.
12. ALWAYS be sure to relieve all pressure by shutting o the engine and moving the valve control handle
back and forth should it become necessary to loosen or remove any hydraulic fitting.
NEVER
to be unsafe and will void the warranty.
According to the Consumer Products Safety Commission (CPSC) and the U.S. Environmental Protection
Agency (EPA), this product has an Average Useful Life of seven (7) years, or 130 hours of operation.
At the end of the Average Useful Life have the machine inspected annually by an authorized service
dealer to ensure that all mechanical and safety systems are working properly and not worn excessively.
Failure to do so can result in accidents, injuries or death.
alter your log splitter in any manner. Such alterations may cause your log splitter
BE-LS25Ex
Publicité
