ASSEMBLY
UNPACKING THE CONTAINER
WARNING
and will require additional people or mechanical handling equipment.
NOTE: All references in this manual to the left or right side and front or back of the log splitter are from the
operating position only. Exceptions, if any, will be specified.
Unpacking tools needed:
• Wrench 13mm
• Scissors or Knife
• Pry Bar or Claw Hammer
Step 1: Use a 13mm wrench to remove the bottom bolts and washers securing the crate side frames onto the
crate bottom, then lift up and put away the crate top and the cardboard box. See Figure 3.
Use extreme caution unpacking this machine. Some components are very heavy
BE-LS25Ex