IKRA GGSI 180 Manuel D'utilisation page 22

Attention: Noise protection! Please ob-
serve the local regulations when operat-
ing your device.
Intended use
As required, this device may be converted via
simple replacement of the included attachments
into grass shears, bush shears, or into a ground
hook
.
Hints for your work with the tool
The shrub trimmer cuts ornamental shrubs and
light undergrowth or bushes. The device is also
well-suited for ornamental cuts as, for example,
for the care of graves.
The battery-powered grass and shrub
shear can not and should not replace your
hedge shears.
They are exclusively designed to trim and cut
back ornamental shrubs and brush -wood with
a low wood thickness. Any other use is not
deemed appropriate and the manufacturer/ sup-
plier is not liable for damages resulting from
such use.
The grass shears allow for clean cuts of lawn
edges or hardly accessible lawn areas. Each
type of use other than those given in these in-
structions for use can damage the machine and
cause serious risk to the user.
Please always observe the safety instructions
in order to safeguard your guarantee claim and
in the interests of product safety. Due to the
machine's design, we are unable to fully exclude
all residual risks.
Residual dangers
Residual risks always remain even if the hedge
trimmer is used properly. The hedge trimmer's
design can entail the following hazards:
• Contact can be made with the unprotected
blade (resulting in cutting injuries)
• Reaching into or grabbing the hedge trimmer
while it is in operation (resulting in cutting
injuries)
• Unanticipated, sudden movement of the plant
material being cut (resulting in cutting injuries)
• Ejection or catapulting of damaged cutting teeth
• Ejection or catapulting of the plant material
being cut
• Hearing damage if the specified hearing pro-
tection is not worn
• Inhalation of cut materials
GB | Operating Instruction
General safety instructions
Attention! Read all instructions contained
herein. Failure to observe the following
instructions may result in electric shock,
burns and/or severe injury. The term 'pow-
er tool' used in the following includes both
mains-operated tools (with mains supply)
and battery-operated tools (without mains
supply).
KEEP THESE INSTRUCTIONS CARE-
FULLY!
1) Working area
a) Keep your working area clean and
b) Do not operate the tool in potentially
c) Keep children and other persons
2) Electrical safety
a) The mains plug of the power tool
b) Avoid physical contact with earthed
c) Keep the tool out of the rain. The
d) Do not use the cable to carry or hang
GB-2
tidy. Untidy and poorly lit working areas
may lead to accidents.
explosive environments containing
combustible fluids, gases or dusts.
Power tools generate sparks that may
ignite dusts or fumes.
away when you are operating the
power tool. Distractions may result in
the operator loosing control over the tool.
must fit into the mains socket. The
plug must not be modified in any
way. Do not use adapter plugs/con-
nectors in combination with tools
with protective earthing. Unmodified
plugs and fitting sockets reduce the risk
of electric shock.
surfaces as pipes, heaters, ovens and
refrigerators. There is an increased risk
of electric shock if your body earthed.
penetration of water into a power tool
increases the risk of electric shock.