AL-KO solo FMD 90.6 Mode D'emploi page 40

EN
A3: Dismantle mower from FC 13-90.6 HD 2WD / 4WD carrier
Step 1
Now lower the mower with the pedal and the pedal unlocking.
Step 2
Pull the lever for tensioning the V-belt and fix it with a pin (see 3.5.1).
Step 3
Remove the V-belt from the V-
belt disk. Do not take off V-belt
completely.
Step 4
Lift the mower with the pedal and get it engaged in the pedal lock.
Step 5
Remove the two bolts at the
right and the left of the receiver
bar.
Step 6
The mower may now be pushed
from the carrier.
Translation of the original operating instructions - 19 -