AL-KO solo FMD 90.6 Mode D'emploi page 34

6 Maintenance
6.1 Safety
DANGER !
Risk of injury by inappropriately performed
maintenance work!
Defective work may result in serious bodily injuries and
damage to property.
 Make sure that you have sufficient working space.
 Place components separately.
 Remount all components.
 Remount all safety covers.
 Keep the risk area clear of persons.
6.1.1 Cleaning
Tilt the mower upward on the carrier for cleaning.
Please refer to item 3.5 Functions.
1. Stop the carrier and tilt the mower upward.
2. Use a brush to remove grass residues and sand.
3. Clean mower with a damp cloth as appropriate.
6.2 Maintenance plan
Maintenance
Cleaning
Check safety precautions
Check all screws for tight seat
Check blades for wear
Lubrication
Repair paint coat damage and corrosion
X = Described in this Operation Manual in the indicated section.
O = Not described in the present Operation Manual
Translation of the original operating instructions
6.1.2 Check safety precautions
Safety precautions comprise:
- Covers of V-belts.
The mounting devices must not be operated if the covers
show any signs of damage or are removed. They are to be
replaced in case of damage or loss. The mounting devices
must not be started without safety precautions.
6.1.3 Lubrication
The wheel suspension has to be greased regularly and after
extended standstill times.
Prior or after each use Annually
X (Item 7.1.1)
X (Item 7.1.2)
O
O
X (item 7.1.3)
O
Intervals in hours
25 50 100
- 13 -
EN
200