AL-KO solo FMD 90.6 Mode D'emploi page 37

10 Mount adjustment lever for mowing height setting
Mount mower on FC 13-90.6 HD 2WD / 4WD carrier
Dismantle mower from FC 13-90.6 HD 2WD / 4WD carrier
Safety
Delivery, packaging, assembly
ATTENTION!
Squeezing hazard during
installation!
Parts of the body may be squeezed when
components are mounted.
A1: Mount adjustment lever for mowing height
Mount all parts indicated and tighten them with hex-nut
Translation of the original operating instructions
Risk of high dead weight
• Remove machine parts separately from packaging.
Transport inspection
• Check the machine for completeness and potential damage upon delivery.
• The front device shall be supplied to the specialist dealer in a partially
assembled condition.
• Assembly and start-up have to be performed by a specialist dealer and/or an
expert in this field.
Packaging
• Please dispose of packaging materials separately.
EN
- 16 -