Publicité
Les langues disponibles
Les langues disponibles
3.5
Functions
1.
Tilt mower upward
For better access to the bottom of the mower, the entire mower may be tilted upward.
For tilting the mower upward, please proceed as follows:
Attention!
Stop the carrier and remove the ignition key.
Activate parking brake.
1.
Set the mowing height to the lowest level (1) using the adjustment lever.
2.
Before you can tilt the mower upward, the pins and the R-clip on each side have to be removed.
3.
Lower the mower from the carrier perspective.
4.
Pull the lever for the V-belt guide until one of the pins may be set. (Please also refer to 3.4.1)
5.
Remove the V-belt from the V-belt disk. Slightly turn the disk for this purpose.
6.
Lift the mower at the front rod and get it engaged in the securing hook on the carrier.
7.
Have the second pin ready at hand
Translation of the original operating instructions
Pin with R-clip
1 = V-belt
2 = V-belt disk
EN
- 9 -
Publicité
