Flat Bracket; Angled Bracket - Sygonix SY-DB-500 Mode D'emploi

b) Flat bracket
Check how all the parts fit together before installing.
1. Use the holes in the flat bracket as a template for where to drill.
2. Drill holes and insert the dowels using a mallet if needed.
3. Fix the bracket to the wall using the wall screws.
4. Fasten the camera to the bracket using the provided screw.
c) Angled bracket
Check how all the parts fit together before installing.
1. Use the holes in the flat bracket as a template for where to drill.
2. Drill holes and insert the dowels using a mallet if needed.
3. Fix the bracket to the wall using the wall screws.
4. Attach the flat bracket to the angled bracket using the provd-
ed screws.
5. Attach the camera to the bracket using the provided screw.
39