Adhesive Tape - Sygonix SY-DB-500 Mode D'emploi

d) Adhesive tape
Note
• Suitable surfaces include glass or tile.
• Check how the parts fit together before installing.
• For use with flat bracket only.
The product can be attached to a vertical surface using double-
sided adhesive tape.
1. Make sure surface is clean, flat, dry, and non-porous.
2. Peel the backing off one side of the tape and apply it to the
flat bracket.
3. Peel the other side of the adhesive off and adhere to the
mounting surface.
Hold the product against the surface with even pressure
for 1 minute. This will give the adhesive time to bond.
4. Fasten the camera to the bracket using the provided screw.
40