Kenwood Titanium Chef Baker KVC85.004SI Mode D'emploi page 17

Troubleshooting Guide - Continued
Problem
Weighing Function
Display screen freezes
on [- - - -]
Weight changed on
display
Display screen turned
off
Display showing
[0 – Ld]
Cause
The display screen will
freeze during operation.
Display screen showing
a minus reading due to
display not 'zeroed' and
either ingredients or the
bowl has been removed.
Quantity weighed too
small.
Stand Mixer moved during
operation.
Stand Mixer unplugged.
The display screen will
turn off automatically if
the same weight reading is
shown after 5 minutes.
Weighing function
overloaded
Excessive force applied to
Stand Mixer.
13
Solution
Normal operation.
Either zero the screen or
replace the missing ingredients
or refit the bowl.
Use teaspoon and tablespoon
measures for very small
quantities.
Always place the Stand Mixer
on a dry flat surface prior to
weighing.
Do not move the Stand
Mixer during operation of the
weighing function.
Zero the display before
weighing next ingredients
Plug appliance in.
Press the ON/ZERO button
once and the display screen will
light up.
Do not exceed the maximum
weighing capacity of 6Kg.
Do not subject the Stand Mixer
to excessive force as this may
damage the weighing sensor.