Publicité
Les langues disponibles
Les langues disponibles
A
B
A Power Button
Press once to turn on. Press and hold for three
seconds to turn off. Button will glow blue if unit is
connected to a power source.
B Function Button
Quick press to change the temperature units of
the Controller from Fahrenheit (ºF) to Celsius (ºC).
Press and hold this button to initiate priming the
auger, resulting in an extra feed of pellets to the
burn pot. Release to stop priming.
C
Meat Probe Readouts
Displays the temperature reading of the meat
probe (or probes) that are connected. The readout
corresponds with the plug-in connection port
selected.
D Connectivity Icon
Indicates a connectivity with Wi-Fi. When
searching for connection, icon will blink. Once
connection is made, the icon will stay solid.
E
COOK Temperature
Displays the desired cook temperature. This is the
temperature preset that is selected by turning the
temperature control dial.
WWW.PITBOSS-GRILLS.COM
CONTROL BOARD
C
F/C
PROBE 1
FC
PROBE 2
PRIME
FC
I
F
G Controller Knob
H Meat Probe Connection Ports
I
D
E
COOK
ACTUAL
FC
H
Temperature Readout
Displays the Actual temperature from inside
the smoker. Readout is taken by the grill probe
(sensor). Adjusting the Controller Knob will
display the desired target temperature.
Rotate the Controller Knob to change the tem-
perature, then push the Controller Knob to con-
firm the chosen value. The temperature displayed
can be adjusted by 5 degree (°F) increments.
Plug-in the adapter end of a meat probe to a
connection port. The readout will appear on the
display screen for the corresponding meat probe.
Prime Button
Press and hold to activate an extra feed of pellets
to the burn pot.
7
F
G
HAVE A
QUESTION?
Check out some
common FAQs online
or Live Chat with
Customer Care.
PIT BOSS® GRILLS
Publicité
