Disengaging The Chain Brake; Removing And Fitting The Battery; Fitting The Battery; Removing The Battery - Stihl MSA 160 C Notice D'emploi

8 Removing and Fitting the Battery

► Push the hand guard away from the front handle with your
left hand.
The hand guard engages with an audible click. The chain
brake is engaged.
7.2

Disengaging the Chain Brake

► Pull the hand guard toward the front handle with your left
hand.
The hand guard engages with an audible click. The chain
brake is disengaged.
8 Removing and Fitting the Battery
8.1

Fitting the Battery

► Engage the chain brake.
0458-701-9921-E
2
► Push the battery (1) into the battery compartment (2) as
far as stop.
The battery (1) engages in position with a click.
8.2

Removing the Battery

► Stand the saw on a level surface.
► Press both locking levers (1).
The battery (2) is unlocked and can be removed.

9 Switching the Saw On/Off

9.1

Switching On

► Disengage the chain brake.
1
2
1
English
61