Invacare ScanBeta NG Manuel D'utilisation page 14

2.2.5 Mounting the side doors
1. Place the door so that the guide pin in the side tube is fitted into
the brass bush on the bottom of the doors. To facilitate this,
make sure that the bed end pieces are aligned.
2. Swing the upper edge of the door towards the bed end piece,
so that the brass bush and the guide pin fits with the hole in the
corner mounting on top of the corner post.
3. Secure the door using the screws provided
4. Repeat points 1-3 for the other side.
5. Please ensure that both doors are securely mounted and
tightened and that the doors can be opened and closed without
binding.
2.2.6 Mounting the folding side doors
1. Place the folding doors so that the guide pin in the top frame fit
into the brass bush on the bottom of the doors. To facilitate this,
make sure that the bed end pieces are aligned.
2. Swing the upper edge of the folding door in towards the bed end
piece, so that the holes in the brass bush on the upper edge fit
with the holes on top of the corner post.
3. Secure the side bars using the two screws provided.
4. Please ensure that the folding doors are securely mounted and
tightened and that the doors can be opened and closed without
binding.
UM_1542073_UK_DA_ver01.indd 13
3
3
1
13
2011-10-18 10:02:26