Cleaning And Maintenance; Cleaning; Maintenance - Invacare ScanBeta NG Manuel D'utilisation

6. Cleaning and maintenance

6.1 Cleaning

Before cleaning the cot, ensure that the mains cable is removed from the wall socket.
The ScanBeta NG cot cannot withstand cleaning in washing machines or by high pressure water jets.
Clean with a soft wrung out cloth.
Use only neutral liquid cleaning fluids without solvents.
Cleaning of electrical parts must be done using a dry cloth.

6.2 Maintenance

Service and maintenance of the ScanBeta NG cot must only be carried out by personnel, who have undergone the
necessary training and instruction.
- Before use
Ensure that all manual and electrical parts function correctly and are safe to use.
- After 3 months use
Ensure that all manual and electrical parts and tighten all bolts, screws, nuts, etc.
- Annually
Service must be carried out in accordance with the service and maintenance chart.
See Chapter 6.3, "Maintenance chart".
UM_1542073_UK_DA_ver01.indd 23
23
2011-10-18 10:04:45