Assembly The Cot - Invacare ScanBeta NG Manuel D'utilisation

2.2 Assembling the cot
Be aware! Some parts of the cot are heavy. Always lift correctly.
Always leave the cot in the lowest position. This is the safest position should a patient fall out of the cot.
Do not climb under the cot.
2.2.1 Fitting the bed end attachments
1. Place the two bed end attachments in the side frame tubes.
2. Tighten the 2 x screws in each corner using the hexagonal key,
which is attached to the base frame.
3. The bed end attachments should be aligned.
UM_1542073_UK_DA_ver01.indd 10
2
1
10
3
1
2011-10-18 10:02:15