Invacare ScanBeta NG Manuel D'utilisation page 13

2.2.4 Mounting the downward-slideable side
1. Mount the wooden post to the corner posts and mount the
wooden rail on the side frame tube with the included screws.
NOTE! The slots must face in towards each other.
2. Activate the locking pins on each side of the cot side.
3. Guide the plastic rail on the downward-slideable side up from
below and into the slot on the wooden post.
4. Lift the downward-slideable side up with both hands until the
locking pin clicks into place in the hole on the wooden post.
5. Please ensure that both locking pins are secure by lifting the
downward-slideable side lightly up and down
UM_1542073_UK_DA_ver01.indd 12
1
1
2
3
12
2
3
2011-10-18 10:02:23