General Information; Intended Use - Invacare ScanBeta NG Manuel D'utilisation

Foreword
Congratulations with your choice of the Invacare®ScanBeta NG cot.
x
The total load on the ScanBeta NG cot should not exceed 100 kg. (SWL = Patient + mattress + sides
+ other equipment).
x
The ScanBeta NG cot is designed for patients requiring residential or home care nursing, in hospitals
and other healthcare institutions.
x
The ScanBeta NG cot combines stability with ergonomic design, making it easy to disassemble and
operate.
x
The ScanBeta NG cot must only be used in accordance with this user manual and safety instructions.
Please read the entire user manual before using the cot.
You are welcome to contact Invacare®with any questions regarding the use or maintenance of the cot.
All instructions regarding left and right assume a patient is lying in the cot.
Please note that there may be sections of this user manual, that are not relevant for your cot, as the manual
is applicable (at the time of publication) for all existing models.

1. General information

1.1 Intended use

The ScanBeta NG cot has been designed for patients with limited mobility and for use in home care,
hospitals and other healthcare institutions.
The ScanBeta NG cot should only be used by patients whose body weight does not exceed 70 kg.
The ScanBeta NG cot can be adjusted to give the patient good ergonomics and the carer a good
working position.
Depending on the model, the backrest, leg and thigh section or the whole mattress support can be adjusted
using either the hand control or manually.
UM_1542073_UK_DA_ver01.indd 4
4
Patient max. weight
= 100 kg
Max. load (SWL)
= 70 kg
2011-10-18 10:01:11