Ravelli MILD Manuel D'installation, D'utilisation Et D'entretien page 180

ENGLISH
17.2 STATUS VIEWS
ICON STATUS
On
Increasing animation
Off
Off
Switching on animation
Switching off animation
Flashing
On
On
Flashing
Quick flashing
On
On
Flashing
Flashing
On
Flashing
Off
On
* See outlining table of possible anomalies
17.3 POSSIBLE OPERATIONS
The following operations are possible from the
home page:
ICON PRESSURE
Short
Long
Long
Short
Short
Long
180
DESCRIPTION
Valid connection to the Cloud service, with indication of signal
quality
Wi-Fi connecting or invalid Wi-Fi parameters
Wi-Fi parameters not entered
Stove off
Stove in switching on phase
Stove in automatic switching off phase
Stove in test phase or warm start request needs confirming
Stable flame and stove in work
Weekly programmer on and active
Switching on/Switching off from weekly programmer
intervention
Weekly programmer not set correctly
Tangential fan active on zone 1
Technical intervention requested due to expired scheduled
maintenance threshold
Stove in test mode
Stove in alarm (the relative alarm code will appear*)
Stand-by function enabled
Powering on /Shutting down if stand-by active
Stove off
Stove on
VIEW/SETTING
View current time
Stove on/off (in normal operation and/or for restart/reset
after a fault)
Enter the user menu
Desired zone 1 temperature setting using keys
Auto/manual mode setting (if thermostat active) using
keys or
Stove power setting using keys
Start preload cycle (if stove on off, no alarms)
VALUES
on, oFF
See "User menu"
paragraph
Default: 20 °C
Minimum: 0 °C
or
Maximum: 40 °C
F Aut, F nor
Default: P 100
Minimum: P 1
or
Maximum: P 100
LoAd