Ravelli MILD Manuel D'installation, D'utilisation Et D'entretien page 162

ENGLISH
10.3.7 "Silence buzzer" function
This function can only be used when an alarm is
present, otherwise it will not be usable.
To silence the buzzer temporarily, press "Silence".
10.3.8 "Enable/disable buzzer" function
To permanently enable/disable the buzzer, press
the "Enable" or "Disable" button.
162
10.3.9 "Reset planning" function
To reset planning press "Reset".
10.3.10
Fig. 10.17
This function allows you to delay switching on
the appliance only if this is switched off and if the
schedule has not been enabled.
It will be possible to delay switching on the
appliance by a minimum of 15 minutes to a
maximum of 8 hours by using the keys
. Then press "Start".
Fig. 10.18
"Delayed ignition" function
Fig. 10.19
and
Fig. 10.20