Ravelli MILD Manuel D'installation, D'utilisation Et D'entretien page 179

TYPE DISPLAYED TEXT
Pellet hopper over-
temperature alarm
(AL 01)
Board over-temperature
(AL 03)
HW error flue gas probe
(AL 07)
Smoke over-temperature
Critical
(AL 19)
Air pressure controller
error (AL 27)
Unexpected air flow rate
(AL 30)
Fire pot overtemperature
(AL 37)
The 'Warning', 'Error' and 'Critical' messages
will disappear from the main screen on the next
restart, if resolved.
17 CONTROL PANEL
On the back of the stove there is a simple control
panel to perform the basic operations.
17.1 DESCRIPTION
Ventilation
Confirm
Value down
REASON
Automatic re-arming thermostat
connected to the hopper has tripped
The maximum temperature allowed
for the board has been exceeded
Faulty or blown probe
The maximum temperature allowed
for the smoke has been exceeded
The pressure switch is malfunctioning
Incoherent air flow rate reading
Exceeding the maximum permissible
temperature on the probe in the
combustion chamber
Wi-Fi
Alarm
ENGLISH
POSSIBLE SOLUTIONS
Seek Assistance Service
Powering on /Shutting down...
Weekly programmer
Maintenance
Stove status
Stand-by
Powering on /Shutting
down
Value up
Fig. 17.1
179