Publicité
Les langues disponibles
Les langues disponibles
10.3.5 "Pellet mode" function
Optimal combustion depends on various factors
(installation type, operating and maintenance
conditions, pellet type, etc...)
As a general rule, at the end of combustion,
if a lot of residue remains in the fire pot, it is
advisable to edit the combustion configurations
(by increasing the value) until you achieve the
most satisfying solution.
The settable values range from -5 (high quality
pellet) to 5 (low quality pellet).
To set the type of pellet being used, press icons
or
.
Fig. 10.13
10.3.6 "Stand-by" function
By enabling this function the appliance reaches
the desired room temperature and then switches
off.
If this function is not enabled, the appliance
modulates its operation by not switching off.
To enable this function press "On".
Fig. 10.14
ENGLISH
Fig. 10.15
Fig. 10.16
161
Publicité
