FPZ SCL K07R MD-MOR Instructions page 32

•
TMS version
Machines that ensure mechanical seal between the parts that convey air or fluids, minimising leakage.
•
Special electric motors
On request, blowers/exhausters can be manufactured with motors having one or more of the following characteristics:
Special voltages
-
Higher levels of protection against solid bodies and/or liquids (standard IP55)
-
- Higher insulation classes (standard Class F)
Protection devices such as thermal switches, heaters, PTC, PT100
-
•
IE2 motor
The side channel blowers/exhausters can be manufactured using class IE2 motors.
Compared to the standard version, the performance and dimensions may vary; this information is given more precisely in the
specific Data Sheets of the IE2 version.
Further customisation must be requested and agreed when ordering, subject to a feasibility appraisal by the Technical Department.
ATTENTION!
For maintenance of special version machines, contact FPZ.
10.3 PROHIBITIONS
THE FOLLOWING IS STRICTLY PROHIBITED:
- Using the unit in installations for unforeseen use.
- The suction and conveying of aggressive, corrosive and/or harmful fluids.
- Using the unit in conditions different from the values given in the "SPECIFICATIONS" and RATING DATA.
- Using the unit without having installed the suction filter.
- Operation with inlet and/or outlet port closed.
- Making conversions or changes to the unit, maintenance or repair work on own initiative or not envisaged in the manual.
Maintenance work can be carried out only in compliance with that described in this user manual, exclusively by qualified personnel.
IT IS COMPULSORY TO:
- Check and comply with the intended use of the machine.
- Check and comply with the conditions of use specified in this manual.
- Comply with the installation conditions specified in this manual.
- Carry out the preliminary checks as specified in the section "STARTUP".
- Carry out maintenance as specified in section 6.
10.4 REASONABLY FORESEEABLE IMPROPER USE
Non-compliance with the unit's intended use can cause serious accidents.
Failure to comply with the prohibitions/obligations can result in technical faults, damage to the system or accidents.
Danger of serious injury!
•
Listed below are some examples of improper use identified by risk analysis and practical experience, according to the conditions
they can create.
IMPROPER USE
IMPROPER USE LINKED TO NORMAL OPERATION
Failure to comply with the distance for the
motor air intake
Presence of operators and possible contact
with the machine
Use of loose clothing or untied long hair
IMPROPER USE LINKED TO METHODS OF USE
CONSEQUENCES
Motor overheating and possible damage to
the blower
Operator coming into contact with hot parts
of the machine
Possible catching or suction in the machine
or in the motor fan
32 / 113
RISKS
RISK FOR THE MACHINE
RISK FOR THE OPERATOR
RISK FOR THE OPERATOR