Publicité
Les langues disponibles
Les langues disponibles
en-us Cleaning and maintenance
Reposition the internal glass pane. First insert the front
part into the two clips and the 2 pins in the front into
their housings. Then insert the 2 pins in the rear into
their housings in the oven door by applying slight
pressure.
Remove the locking pins and close the oven door.
8.
How to remove the oven door
WARNING
Failure to follow these instructions when removing the
oven door may lead to personal injury or product damage.
Make sure oven is cool and power to the oven has been
▶
turned off before removing the door. Failure to do so
could result in electrical shock or burns.
The oven door is heavy and parts of it are fragile. Use
▶
both hands to remove the oven door.
The door front is glass. Handle it carefully to avoid
▶
breakage.
Grasp only the side of the oven door. Do not grasp the
▶
handle. It may swing in your hand and cause damage or
injury. Failure to grasp the oven door firmly and properly
could result in personal injury or product damage.
To avoid injury from hinge bracket snapping closed, be
▶
sure both levers are securely in place before removing
the door.
Do not force the door open or closed. The hinge could
▶
be damaged and cause damage or injury.
Do not lay the removed door on sharp or pointed
▶
objects as this could break the glass. Lay it on a flat,
smooth surface, positioned so that the door cannot fall
over.
Note: To avoid injury or damage, make sure that you read
the above WARNING before attempting to remove the
oven door.
Open the oven door to its fully open position.
1.
Lock the two hinges on the left and right using the
2.
locking pin. The locking pins must be fully inserted into
the holes in the hinges.
30
3.
CAUTION Closing the door by 8" (203 mm) takes
the pressure off the spring. If this is not done, the door
can still be removed but the latch will now slam shut
and may pinch or cut your hand.
Close the oven door until it catches on the hinge stop
levers, locking the hinges at the correct angle for door
removal. The door can be removed when it is pulled up
from the open position by about 8 inches (203 mm).
This takes the tension off the spring-loaded hinges so
that the door can be easily lifted out.
The door is heavy. Use both hands to firmly grip it by
4.
the sides. Do not grip the door by the handle. Keeping
the angle of the door the same, lift the door straight up
approximately 3/4" (19 mm) to unhook the hinges from
the slots. Pull the door out towards you until the hinges
are clear of the oven housing.
Place the door in a convenient and stable location for
5.
cleaning.
Refit the door in the reverse order in which it was
6.
removed.
Note: Do not throw away the locking pins. Keep them in a
safe place. They will be needed anytime the door is
removed from the appliance.
Replacing an oven light
WARNING
WHEN REPLACING AN OVEN LIGHT:
Make sure the appliance and lights are cool and that the
▶
power to the appliance has been turned off before
replacing the light bulb(s). Failure to do so may result in
electrical shock or burns.
Wear gloves.
▶
The lenses must be in place when using the appliance.
▶
The lenses serve to protect the light bulb from breaking.
▶
The lenses are made of glass. Handle carefully to avoid
▶
breaking. Broken glass may cause an injury.
The light socket is live when the door is open.
▶
Light socket is live when door is open if main power supply
is not turned off.
Turn off main power supply at the service panel before
▶
changing the light bulbs.
Publicité
