Publicité
Les langues disponibles
Les langues disponibles
en-us Cleaning and maintenance
Part
Recommendations
Glass
Clean with soapy water or glass
cleaner. Apply Fantastik®
409®
1
to a clean sponge or paper towel
and wipe clean. Avoid using powder
cleaning agents, steel wool pads and
oven cleaners.
Painted
Clean with soapy water or apply
surfaces
Fantastik®
clean sponge or paper towel and wipe
clean. Avoid using powder cleaning
agents, steel wool pads and oven
cleaners.
Porcelain
Immediately wipe up acid spills like fruit
surfaces
juice, milk and tomatoes with a dry
cloth when surface is cool enough to
touch. Do not use a moistened sponge/
cloth on hot porcelain. When cool,
clean with soapy water or apply Bon-
Ami®
1
sponge. Rinse and dry. For stubborn
stains, use soap-filled pads. It is normal
for porcelain to show fine lines with age
due to exposure to heat and food soil.
Stainless steel
Never allow food stains or salt to
surfaces
remain on stainless steel for any length
of time. Always wipe or rub in the
direction of the grain. Clean with a
soapy sponge, then rinse and dry, or
wipe with Fantastik®
409®
1
sprayed onto a paper towel.
Protect and polish with Stainless Steel
Magic®
condition with the Bosch Stainless
Steel Conditioner (order no. 00576696)
and a soft cloth. Do not apply to logos
and labeling. Remove water spots with
a cloth dampened with white vinegar.
Use Bar Keeper´s Friend®
heat discoloration. Chlorine or chlorine
compounds in some cleansers are
corrosive to stainless steel. Check the
ingredients on the label.
Plastic &
When cool, clean with soapy water,
controls
rinse and dry.
Meat probe
Wipe with soapy water. Do not
submerge. Do not wash in the
dishwasher.
Printed areas
Do not use abrasive cleaners or
(words &
petroleum based solvents.
numbers)
1
These marks are registered trademarks of their
respective owners. All other trademarks are
trademarks of BSH Home Appliances Corporation or its
affiliated companies.
28
1
or Formula
1
1
or Formula 409®
to a
or Soft Scrub®
1
to a damp
1
or Formula
1
and a soft cloth. Protect and
1
to remove
Cleaning self-cleaning surfaces
CAUTION
Do not use oven cleaner on the self-cleaning surfaces.
These will damage the surfaces.
If oven cleaner does get onto these surfaces, dab it off
▶
immediately using water and a sponge cloth.
Do not rub the surface and do not use abrasive cleaning
▶
aids.
Use a microfiber cloth with soapy water to clean the
1.
upper and lower part of the self-cleaning surfaces.
Select Multi-Rack, and set the temperature to 550 °F
2.
(290 °C).
Switch off the appliance after one hour.
3.
Note: The self-cleaning surface on the back panel must
4.
remain in the oven cavity.
If the side, self-cleaning surfaces are particularly dirty,
remove these from the oven cavity.
→ "How to remove the rack guides and self-cleaning
surfaces", Page 28
Wash the self-cleaning surfaces with hot soapy water.
5.
Rinse and dry the self-cleaning surfaces.
6.
Insert the self-cleaning surfaces into the oven cavity.
7.
Select Multi-Rack, and set the temperature to 350 °F
8.
(175 °C).
Switch off the appliance after one hour.
9.
Maintenance
How to remove the rack guides and self-cleaning
surfaces
The rack guides are fixed to the side panels of the oven
cavity at three points. The self-cleaning surfaces are fixed
with the rack guides.
WARNING
The rack guides and self-cleaning surfaces get very hot.
Never touch the rack guides and self-cleaning surfaces
▶
when they are hot.
Always allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
When the oven is cool, grip the front of the rack guide
1.
and pull it round to the middle of the oven cavity.
a The front hook of the rack guide will come out of the
hole.
Swing the rack guide round further and pull it out of the
2.
rear holes in the side panel.
Publicité
