Publicité
Les langues disponibles
Les langues disponibles
en-us Oven operation
You should preferably use cookware with a flat base
because uneven cookware bases impair the heat supply.
No cookware/cookware of an unsuitable size
If you do not place cookware on the selected cooking zone
or the cookware is made of an unsuitable material or is not
the right size for the cooking zone,
cooking zone display. To make the display go out, place a
suitable item of cookware on the cooking zone. If you do
not place a suitable item of cookware on the cooking zone
within 30 seconds, it automatically switches off.
Empty cookware or cookware with a thin base
Do not heat empty cookware and do not use cookware
with a thin base. The cooktop is equipped with an internal
safety system. However, empty cookware may heat up so
quickly that the "Automatic switch-off" function does not
respond quickly enough and an excessive temperature is
reached. As a result, the base of the cookware may melt
and damage the glass plate. In this case, do not touch the
cookware; switch off the cooking zone. If the cooking zone
no longer works after cooling down, contact Customer
Service.
Cookware detection
Each cooking zone has a minimum limit for the cookware
detection and this depends on the ferromagnetic diameter
and the material of the base of the cookware. Therefore,
use the cooking zone that best corresponds to the
diameter of the pan base.
8 Oven operation
Oven operation
Here you will find out everything you need to know about
Oven operation
operating your oven.
8.1 Switching on the oven
Note: Always keep the appliance door closed when it is in
operation.
Turn the function selector to the desired operating
1.
mode.
a A default value for the temperature or grill setting is
displayed.
Use
or
to set the desired temperature or grill
2.
setting.
a The oven switches on.
Grill settings
You must set a grill setting for the "broil" and "conv boil"
types of heating.
You can choose from the following grill settings:
20
lights up in the
Switching off the oven
Turn the function selector to "off".
▶
8.2 Time-setting options
Setting the electronic clock
You can alter the clock if you need to (e.g. for daylight
savings time). To do this, the oven must be switched off.
Press the
button twice.
1.
lights up in the display.
a
Change the time using the
2.
a The time is saved automatically.
Setting the kitchen timer
The kitchen timer is a countdown timer that has no affect
on oven heating. The duration of the kitchen timer can be
set from 30 seconds to 23 hours and 59 minutes.
Press the
button.
1.
lights up.
a
Use the
and
buttons to set the desired time for the
2.
timer.
a An audible signal sounds once the time has elapsed.
Notes
¡ – To change the remaining time, press the
Then use the
and
remaining time.
– To cancel the kitchen timer, press the
set the remaining time to zero using the
buttons.
¡ The kitchen timer will be deleted if the meat probe is
inserted.
Switching off the signal tone
Press any button to switch off the audible signal.
▶
Note: You can change the duration of the audible signal in
the basic settings.
Setting the cooking time
The cooking timer automatically ends a heating mode after
a set period of time.
Set the required type of heating and temperature.
1.
a The oven starts.
Press the
button twice.
2.
lights up in the display.
a
Use the
and
buttons to set the operating time
3.
duration.
The operating time duration can be set from 1 minute to
13 hours. The cooking time can be set in one-minute
increments up to one hour, and then in five-minute
increments.
a The cooking time counts down in the display.
Minimum
Medium
Maximum
and
buttons.
button.
buttons to change the
button. Then
and
Publicité
