Bosch HIS8055U Manuel D'utilisation page 14

en-us Familiarizing yourself with your appliance
4.2 Control panels
You can use the control panel to configure all functions of
your appliance and to obtain information about the
operating status.
Cooktop control panel
The cooktop has one control knob for each cooking zone.
Push in and turn to the right to set the desired power level.
The markings around the control knobs show the available
power levels. If you turn on any cooking zone, the cooking
zone display at the front of the cooktop surface lights up.
Note: The image of the control knob is representative.
Depending on the available settings, the individual control
knobs may have some but not all functions described in
the following chart.
Knob position Function
0 Cooking zone turned off
1 - 9 Power levels
max SpeedBoost®
Panel lock
W1 Keep warm
W2 Melting
W3 Simmering
14
Cooking zone positions
The markings next to each of the control knobs show
which cooking zone they control.
Front left cooking zone
Front right cooking zone
Rear left cooking zone
Rear right cooking zone
Cooking zone displays
When you turn on a cooking zone, the power level or
function is displayed in the cooking zone display.
Display Function
Cooktop on indicator
... Power level
/ Residual heat
⁠ SpeedBoost® active
Panel lock active
Keep warm
Melting
Simmering
NOTICE:
Do not place hot cookware on or close to the display.
Repeated overheating may impair proper function of the
electronics.