Publicité
Les langues disponibles
Les langues disponibles
Insert the rack.
2.
Tilt the rack up to allow the stop to slide onto the rack
3.
guide.
Bring the rack to a horizontal position and push it in the
4.
rest of the way.
The rack should be straight and level.
Removing the flat rack from the oven
Grasp the rack firmly on both sides and pull it toward
1.
you.
When the stop is reached, tilt the rack up and pull it out
2.
fully.
6 Before using for the first time
Before using for the first time
Carry out these steps before using your appliance.
Before using for the first time
¡ The appliance must be properly installed by a qualified
service provider before use.
¡ Read and understand all safety precautions → Page 3
and information in the Use and Care Manual prior to
operating.
¡ This Use and Care Manual covers several models. Not
all features are available on all models.
6.1 Setting the time
Once the appliance is connected to a power supply, :
flashes on the display. Set the time.
Use the
and
buttons to set the time.
1.
Press the
button.
2.
a The time has now been set.
Note: Once the period allowed for setting the time on the
clock has elapsed, the time will automatically be saved.
6.2 Cleaning the appliance before using it for
the first time
In order to prevent excess smoke and odor from
manufacturing oils, heat up the oven for the first time when
it is empty and closed.
Note: There may be a slight odor during first uses. This is
normal and will disappear. Keep the room ventilated while
the appliance is heating.
Before using for the first time en-us
Remove all packing materials and literature from the
1.
cooktop surface and the oven cavity.
Remove the accessories and the rack guides from the
2.
oven cavity.
Completely remove any leftover packaging, e.g. small
3.
pieces of polystyrene, from the oven cavity.
Some parts are covered with a protective film. Remove
4.
this scratch protection film.
Wipe the smooth surfaces in the oven cavity with a soft,
5.
damp cloth.
Turn the function selector to bake.
6.
Use
to set the maximum temperature.
7.
Note: When the appliance is heating up for the first
time, you may hear crackling noises coming from the
oven.
Switch the oven off after one hour.
8.
Once oven has cooled wipe out the oven cavity with hot
9.
soapy water and replace the rack guides. If necessary,
clean the door panels.
Wipe off the cooktop surface with a clean, damp sponge
10.
and dry.
6.3 Cleaning the accessories
Before using the accessories, clean them thoroughly
▶
using a cloth and warm soapy water.
7 Cooktop operation
Cooktop operation
Here you will find out everything you need to know about
Cooktop operation
operating your cooktop.
7.1 Setting the power level
Adjust the power level of the cooking zone with the control
knobs.
Push and turn the control knob clockwise to the desired
▶
power level.
a The cooktop on indicator lights up.
a The selected power level lights up in the cooking zone
display.
a When you set down an additional piece of cookware on
another cooking zone, the cookware is detected and the
corresponding cooking zone display shows .
Notes
¡ If there is no cookware on the cooking zone,
in the cooking zone display. This means that the
cooking zone tries to detect the cookware. Place
cookware on the cooking zone within 30 seconds, or the
cooking zone will switch itself off. Turn the control knob
to 0 and set the power level again.
¡ If the indicator lights up while cookware is present on
the cooking zone, check whether the cookware is
suitable for induction cooking.
→ "Induction cooking", Page 19
lights up
17
Publicité
