Publicité
Les langues disponibles
Les langues disponibles
en-us Cooktop operation
¡ The cooktop may temporarily reduce the power
automatically to protect the fragile parts of your
appliance and to prevent the appliance from producing
excess noise.
7.2 Turning the cooking zone off
Turn the control knob to 0.
▶
a The residual heat is displayed on the cooking zone
display until the cooking zone has cooled off.
a When all cooking zones are turned off, the cooktop on
indicator goes out. The cooktop is turned off.
7.4 Warming zone
With the warming levels you can use preset power levels for various applications.
Power level
W1
W2
W3
Setting the warming level
Push and turn the control knob to the desired warming
▶
level.
a The temperature is kept automatically at the desired
level.
7.5 SpeedBoost®
With this function you can heat larger quantities of water
faster than with power level 9. This function temporarily
increases the top output of the selected cooking zone.
Activating SpeedBoost®
WARNING
Oil and fat heat up quickly with the SpeedBoost® function.
Overheated oil and fat may ignite.
Never leave the cooktop unattended during cooking.
▶
Turn the control knob of the desired cooking zone
1.
clockwise to 9.
Note: If the control knob is already on position 9
continue with the next step.
Slightly overturn the control knob clockwise to max up
2.
to the stop. Hold it in this position for 3 seconds until
lights up in the cooking zone display.
Release the control knob.
3.
a The control knob automatically returns to 9.
a SpeedBoost® is activated for 10 minutes.
a After 10 minutes a signal sounds and the cooking zone
switches to power level .
18
Function
Keep warm
Melting
Simmering
7.3 Residual heat indicator
The cooktop is equipped with a residual heat indicator for
each cooking zone. The residual heat indicator lights up
when a cooking zone is turned off. Do not touch the
cooking zone when the residual heat indicator lights up.
Display
Meaning
The cooking zone is hot.
The cooking zone is warm.
If you remove the cookware from the cooking zone during
cooking, the residual heat indicator and the selected
power level flash alternately.
Display
Deactivating SpeedBoost®
If you do not deactivate the SpeedBoost® function, it turns
off automatically after 10 minutes. The cooking zone
continues operating with power level 9.
Turn the control knob to a different power level.
▶
goes out.
a
a The cooking zone switches to power level .
Note: In certain circumstances, this function may switch
off automatically in order to protect the electronic elements
inside the cooktop.
7.6 Panel lock
You can use the panel lock to prevent the cooktop from
being turned on accidentally.
Turning the panel lock on
Requirement: The cooktop is turned off.
Push and turn the two left cooktop control knobs
▶
counter-clockwise to
3 seconds.
a lights up in the cooking zone display.
a The cooktop does not respond when any control knob is
operated.
Turning the panel lock off
Push and turn the two left cooktop control knobs
▶
counter-clockwise to
3 seconds.
a The cooktop control panel is unlocked.
Temperature °F (°C)
115 (45)
160 (70)
205 (95)
and hold them in this position for
and hold them in this position for
Publicité
