Malfunction
Defects in the drive
and working
hydraulics
Defects in the
braking system
Generator does not
charge
Heating/ventilation
system fails
F06D
GB
Possible cause
The filter is clogged
Lack of oil in the hydraulic
oil reservoir
Electrical connections to
the axial piston pump are the wiring diagram or
loose, disconnected or
oxydized
Parking brake does not
hold the loader
Service brake works
irregularly
Plug connection is loose Push in plug connec-
V-belt torn
Generator speed too low Check V-belt tension;
Fuse in the fuse box is
defective
Control valve on engine
is defective
Remedy
Replace filter insert
Refill oil
Connect according to
clean
Check settings; if
necessary, adjust or
replace the brake
linings *
Check storage
pressure *
Check connection
elements between
brake pedal and
pressure release valve
tion and secure
Replace V-belt
(see Engine Operating
Instructions)
if necessary, tighten
Replace fuse
(section 2.2)
Make control valve
move freely
9-2