Publicité
Les langues disponibles
Les langues disponibles
Timer knob
The timer is a simple device which buzzes when the set time has been reached
(1 to 60 minutes).
To use the timer, the ringer must be wound up by turning the knob (B) almost
one full turn clockwise; then, turning back, set the required time by aligning the
number corresponding to the minutes with the fixed reference on the front panel.
The timer does not affect the operation of the oven, which will stay on even after
the buzzer has sounded; you will have to manually return the program knob (A)
(or (D) for gas cooking) back to position
End of cooking clock
This clock is already set for manual oven use, therefore cooking is possible even
without adjusting it
Right knob
Press the right knob to select in sequence the functions to be activated (timer, end
cooking, cooking start, time setting), signalled by the respective LED blinking.
Press this knob briefly to check already programmed settings (Query), or press it
for about 2 seconds to cancel settings (Reset).
Left knob
Turn the left knob to set the hands of the time clock relevant to the activated
function (LED blinking).
LED's
– blinking: ready for setting or signalling end of function (together with the
ringer)
– on: function in progress
Timer (
)
To set the timer, press the right knob once (the corresponding LED starts blinking); then, turning the left knob, move the
hands to set the timer duration. Press the right knob again to confirm the setting and the corresponding LED changes
from blinking to steady. The hands return to their initial position to indicate the current time: when the set time is
reached, the ringer sounds (it can be stopped by pressing the right knob).
The timer does not control oven heating.
End cooking (
)
To set the end of cooking, press the right knob twice (the LED of the symbol
knob, move the hands to set the end of cooking time.
The LED will blink for the next 10 seconds (for possible adjustments), after which the setting will be acquired and the
LED becomes steady.
The same effect is obtained by pressing the right knob twice during blinking.
At the end of cooking, oven heating will be deactivated and the ringer will sound for 1 minute; it can be stopped by
pressing the right knob.
NB: At the end of cooking the oven stays hot at around the previously set cooking temperature for many minutes;
therefore to avoid overcooking food, it is advisable to remove it from the oven.
End of cooking (
) with delayed start (
Delayed start of cooking can only be activated consequently at the end of cooking; when set, pressing the right knob
confirms the "stop", and at the same activates the blinking LED of the symbol
start of cooking time (naturally this will be before the end, therefore the hands can only be moved back). Confirm by
pressing the right knob again. The data will be automatically acquired also by allowing the blinking to continue for the
10 seconds. The LED's of the symbols
LED of the symbol
will remain on.
The ringer will sound for 1 minute at the end of cooking; it can be stopped by pressing the right knob.
Setting the time of day (
To set the correct time, just press the right knob three times (the LED of the clock symbol starts blinking), then turn the
left knob. After setting the right time, press the right knob to confirm.
Note: the clock can be used to program the start and end of cooking time, but only with purely electrical
functions such as grilling or cooking with the top heating element.
18
SM 51 G / CM 55 G
.
)
and
stay on and the oven will switch on at the set time, when only the
)
starts blinking); then, turning the left
. Turn the left knob to also set the
– 9 –
B
B
I X I
I
I X
I
I
TIMER
STOP
IX
START
V I
I V I I
I VI
V
VI
EN
Publicité
