Safety Instructions For The Mains Connection En; Warning And Notice Signs En; Emergency Information En; Product Description - Abicor Binzel FEC 115 V Mode D'emploi

3 Product description

2.6 Safety instructions for the mains connection
NOTICE
• Make sure that the power supply cable is not damaged by being driven over, crushed, torn or similar.
• The mains connecting cable must be checked for damage and wear at regular intervals.
• The fume extraction system may only be operated with an undamaged power supply cable.
• Only authorized personnel are allowed to replace the power supply cable and the power plug
(in Germany, see TRBS 1203).
• When replacing the power plug of the power supply cable, protection from splashes and the mechanical strength must
still be guaranteed.
• Use a rubberized cable H07RN-F3G1.5 when replacing the power supply cable.
2.7 Warning and notice signs
The following warning and notice signs can be found on the product:
Symbol
These markings must always be legible. They may not be covered, obscured, painted over or removed.
2.8 Emergency information
In the event of an emergency, immediately disconnect the following supplies:
• Electrical power supply
• Compressed air supply
Further measures can be found in the power source operating instructions or in the documentation for other
peripheral devices.
3 Product description
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert and modify the device to enhance its performance without authorization.
• Only qualified personnel are permitted to perform work on the device or system.
EN - 6
Meaning
Read and observe the operating instructions!
Caution: hot surfaces!
FEC
BAL.0533.0 • 2019-11-15