Emptying The Filter Housing En; Changing The Filter En - Abicor Binzel FEC 115 V Mode D'emploi

FEC
Check the following:
Every day
• Visual inspection:
Fume extraction system or parts of
system damaged?
• Visual inspection:
Cable connections damaged?
• Filling level of the dust collecting
drawer
 9.3 Emptying the filter housing on
page EN-19
• Visual inspection:
Are the seals damaged?
• Deterioration of the carbon brushes
 Service life of carbon brushes on
page EN-17
Tab. 9 Maintenance intervals
Service life of carbon brushes
The carbon brushes have a service life of approx. 800 hours. The service life is reduced by 30% each time a carbon brush
is replaced. The carbon brushes can be replaced twice in total. After two replacements, the motor must then be replaced.
BAL.0533.0 • 2019-11-15
Every month
• Visual inspection:
Filter untight or dirty?
(trails of dust or deposits on the air
outlets)
 9.4 Changing the filter on
page EN-20
• Visual inspection:
Exhaust air filter untight or dirty?
 9.4.3 Replace the exhaust air filter
on page EN-22
• Visual inspection of the FEC filter
pad:
Filter not tight or dirty?
 9.4.4 Changing the FEC filter pad
on page EN-23
9 Maintenance and cleaning
Every year
• Visual inspection:
Dust in the turbine area?
Remove dust using an industrial
vacuum cleaner or a damp
disposable cloth.
• Check that the dust collecting
drawer
is air tight.
EN - 17