Publicité
Les langues disponibles
Les langues disponibles
Do not operate the multimeter when it is open, when the battery compartment is open, or the battery
compartment lid is missing. The safety mechanism prevents the opening of the battery and fuse lid
when test leads are plugged into the measurement sockets. It also prevents test leads from being
plugged in when the battery and fuse lid is open.
Measurements in damp rooms or under unfavourable environmental conditions are not permitted.
Unfavourable environmental conditions are: dampness or high humidity, dust and flammable gases,
vapours or solvents, as well as thunderstorms or similar conditions such as strong electrostatic fields,
etc.
Use only test leads or measurement accessories which meet the specifications of the multimeter.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In addition,
improper use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions
carefully and keep them. Make this product available to third parties only together with its operating
instructions.
Observe all safety notes and information given in these instructions.
3. OPERATING ELEMENTS
See the fold-out page.
1 Rubber protective frame
2 Display
3 SHIFT/SETUP button
Switch the measuring function (red symbol on the rotary switch) /
switch function of the buttons (blue button labels)
4 Rotary switch for measurement function selection
5 mAμA measurement socket
6 10 A measurement socket
7 °CHzVΩ measurement socket (for "plus" of the same size)
8 COM measurement socket (reference potential, "minus")
9
-button
Low Imp. 400 kΩ button for impedance switching
48
10 Function buttons:
a H/LIGHT (+/COMP) button:
"H" = hold function to freeze the measurement display
"LIGHT" = set the display brightness
"+" = increase the value
"COMP" = comparison mode
b MAX/MIN (View/►) button:
"MAX/MIN" = for recording and displaying the max. and min. values
"View" = view the stored values
"►" = navigation in the SETUP menu
c REL/PC (Log/◄) button:
"REL" = reference value measurement
"PC" = data transmission to a PC via optical interface
"Log" = save measurements
"◄" = navigation in the SETUP menu
d RANGE (-) button:
"RANGE" = manual value range selection
"-" = reduce value
11 Optically insulated interface
12 Stand connection thread
13 Folding positioning bracket
14 Battery compartment
15 Screw for battery and fuse compartment
16 Fuse compartment
49
Publicité
