probst SG-80-MAXI-PGL2 Instructions D'emploi page 54

Operation
6.4.2 Automatic release
The automatic release with switching delay avoid a accidently unhocking of the automatic release and
therefore a closing of the device (SG) without a gripping good. Reason for a accidently closing is a
jumping motion of the device (SG), caused when driving very fast over uneven ground with the lifting
machine (excavator).
The fast driving with the device (with or without load) over uneven grounds is forbidden
53100415 / 53100380 / 53100416 / 53100284
Ill. C
Automatic release with
switching delay
Rotation break
40110228
21 / 26
Ill. D
Ill. E
GB