Dreame DreameBot F9 Pro Manuel D'utilisation page 5

Safety Information
Batteries and
Charging
Laser Safety
Information
Hereby, Dreame Trading（Tianjin）Co., Ltd. declares that the radio equipment type RLF22GA is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address: https://global.dreametech.com
For detailed e-manual, please go to https://global.dreametech.com/pages/user-manuals-and-faqs
·
Do not use any third-party battery, charger, or charging dock. Use only with
RCS1 supply unit.
·
Do not attempt to disassemble, repair, or modify the battery or charging
dock on your own.
·
Do not place the charging dock near a heat source.
·
Do not use a wet cloth or wet hands to wipe or clean the dock's charging
contacts.
·
Do not improperly dispose of old batteries. Unneeded batteries should be
discarded at an appropriate recycling facility.
·
If the robot will not be used for an extended period, fully charge it, then turn
it off and store in a cool, dry place. Recharge the robot at least once every 3
months to avoid over-discharging the battery.
·
This product contains batteries that can only be replaced by qualified
technicians or after-sales service.
·
The laser sensor in this product meets the IEC 60825-1:2014/EN 60825-
1:2014/A11:2021 Standard for Class 1 laser products. Please avoid direct
eye contact with it during use.
CLASS 1 LASER PRODUCT
CONSUMER LASER PRODUCT
EN 50689:2021
EN
3