Before Use
1. Remove the protective strips
2. Install the side brush
Click
Note: Install the side brush until it clicks into place.
3. Place the charging dock on the level ground
against the wall and connect it to a power outlet
> 0.5 m
> 1.5 m
Note:
· Keep the immediate area 1.5 m in front of the charging dock and 0.5 m to its
both sides clear of objects.
· To ensure you can connect to the robot with your phone well, make sure the
robot and charging dock are within WiFi range.
· Do not place the charging dock in an area with direct sunlight or where other
objects might block the signal, as this may hinder the robot from returning to
the charging dock.
4.Place the robot onto the charging dock to charge
Note:
· Fully charging is recommended before first-time use. This ensures that the
robot returns to the charging dock successfully.
· Do not move the the charging dock while the robot is cleaning.
> 0.5 m
EN
9