Routine Maintenance
EN
Clean the Dust Box and Filter
1. Open the robot cover, then press the dust box clip to remove the dust box.
2. Open the dust box cover and empty the dust box as shown in the diagram.
14
3. Remove the filter and tap its basket gently.
Note:
· Do not attempt to clean the filter with a brush, a finger or sharp objects to
prevent damage.
4. Rinse the dust box and filter with water and dry them completely
before reinstalling.
Note:
· Rinse the dust box and filter with clean water only. Do not use any detergent.
· Use the dust box and filter only when they are completely dry.
12
11
1
10
2
24 hrs
9
3
8
4
7
5
6