Dreame DreameBot F9 Pro Manuel D'utilisation page 12

Connecting with Dreamehome App
EN
This product works with the Dreamehome app, which can be used to
control your device.
Scan the QR code on the robot, or search " Dreamehome" in the app store to
download and install the app.
2. Add Device
Open the Dreamehome app, tap "
code above again to add "DreameBot F9 Pro". Please follow the prompts to
finish the Wi-Fi connection.
10
QR Code
" in the upper right, and scan the QR
Wi-Fi Indicator
·Blinking slowly: To be connected
·Blinking quickly: Connecting
·On: Wi-Fi connected
QR Code
Note:
• Only 2.4GHz Wi-Fi is supported.
• Due to upgrades in the app software, the actual operations may be different
from the statements in this manual. Please follow the instructions based on the
current app version.
3. Reset Wi-Fi
Simultaneously press and hold the buttons
prompt saying, "Waiting for the network configuration." Once the Wi-Fi
indicator is blinking slowly, the Wi-Fi has been successfully reset.
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and
add the device again.
and until you hear a voice