Displaying Stored Individual Readings And Emptying The Memory - boso Medicus Exclusive Mode D'emploi

Displaying stored individual readings and emptying the memory

¬ To display the most recent reading stored, press
the M button again after retrieving the averages.
The number of the measurement appears in the
display (see illustration 10).
The corresponding measurement value appears after
EN
3 seconds (see illustration 11).
Illustration 10
72
:
Illustration 11
¬ Repeated pressing of „M"
will now successively dis-
play all measurements con-
tained in the memory as
described above.
¬ Pressing the START button
switches off the device.
If no button is pressed, the de-
SYS.
vice automatically switches off
mmHg.
after 60 seconds.
DIA.
Emptying the memory:
mmHg.
hold down the M button for
approximately 5 seconds until
PUL.
/min.
the symbol flashes. The
memory is now empty.