Displaying Individual Stored Values And Clearing The Memory Store - boso medicus control Mode D'emploi

Displaying individual stored values and
clearing the memory store
➡ Recall the last measurement stored in the mem-
ory by pressing „M" again after having recalled
the average value. The number of the measure-
ment appears in the display (see illustration 10).
The corresponding measurement value appears after
3 seconds (see illustration 11).
M
M
N 01
Illustration 10
M
Illustration 11
➡ Repeated pressing of „M"
will now successively dis-
play all measurements con-
tained in the memory as
described above.
➡ To start a new measure-
ment,
„START".
Systole
If no button is pressed, the unit
mmHg
switches off automatically after
5 seconds.
Diastole
mmHg
Clearing the memory store
Press „M" and hold for 5
Pulses/min.
seconds until the symbol
starts to flash. The memory
store is now cleared.
simply press
59