Displaying Individual Stored Values - boso medistar S Mode D'emploi

Displaying individual stored values

➡ In order to bring back the last mea-
surement stored, press the MEMO-
RY button once more. The number of
the measurements appears in the
display. After three seconds the cor-
responding measurement value
(systole, diastole and pulse) appears
automatically.
Bild 7
➡ By repeated pressing of the MEMO-
RY button, all stored measurements
will be brought up in succession
and appear in the display as descri-
bed above.
If no button is pressed, the unit switches
off automatically after 5 seconds.
➡ To start a new measurement, simply
press „START".
➡ Please note: if the batteries are
removed the memory store is era-
sed.
57